Logo embroidery

A logo embroidery is made completely according to your template (e.g. PDF file). Logos can also be changed according to your wishes, e.g. with another text. The freedom of design are virtually unlimited.

Monogram or text embroideries, on the other hand, are done according to predefined fonts, sizes and colors. Here is an extensive selection available, so certainly the right thing for you.

The logo embroidery is applied directly to the textile and thus looks more noble. Product and customizing become one. Patches or embroidered emblems, have the advantage that they are reusable and can survive the carrier product. Simply remove and reuse on another product!

Based on our experience, we especially recommend embroidery in the commercial sector because they are more durable and robust than printings. While a print is washable up to a maximum of 40°C, the washability up to 95°C for embroidery is unbeatable.

Since single-color yarns are used for embroideries, unfortunately no color gradients can be realized here. Also very fine details in a logo are sometimes difficult to implement. In such cases, we strongly recommend that you have a preview created and then put the order into production. This delays the delivery time, but results in getting the result you desire.

For embroideries in the chest area we recommend a size of 10 cm width for round or square shapes. On the collar, the logo should have a maximum of 1.5 cm in height, on the sleeve a maximum of 8 cm in width. On aprons or jackets, the logo may, however, like to be a bit larger. Our experts in customizing will be pleased to advise you to find the right logo size for you.

For our embroidery, we rely on the highest quality yarns, which are characterized by longevity and resistance to boiling up to 95°C. We only use colors from the Madeira color chart shown on our logo embroidery page. So we certainly find the right color for your corporate design.

We create your logo based on a file template (formats: .jpg, PDF or vectorized file) with at least 300 kB or a resolution of 120 dpi.

For soft, stretchy fabrics (such as polo shirts) we put a water-soluble film under the embroidery to achieve a sharp, clean embroidery image. If any remains of this film are in your embroidery design, they will dissolve during washing.

To stabilize the embroidery, we also use an underlay fleece on the inside of the textile. After washing, this fleece softens but remains visible. Please do not tear the fleece out, otherwise the embroidery image may change.

Threads and knots are part of the embroidery image and do not represent a quality defect. There are threads on the inside of the textile (back of the embroidery image). Please do not cut these threads off, otherwise the entire threadline could break loose.

In order to get a comprehensive overview of the quality of our customizing, you can order one or more of our customizing samples in our online shop without obligation. If you have extensively checked the samples, please send them back. So you can make an informed decision or compare different types of customizing. This service is free of charge for you - we will refund the nominal fee once you have returned the sample. You can find the samples in our online shop via the search term „sample customizing “.

In order to be able to embroider your logo, an embroidery file must first be created from the logo template. This effort, the so-called stencil costs, are a one-off and do not apply to follow-up orders. The setup costs are the costs for the setup of the machine, e.g. for setting up the tenter or changing the colors used. Because this conversion is necessary anew with each order, the setup costs arise per order.

On request, you will receive a preliminary preview in case of order prior to the final production release, e.g. a preview of the embroidery image. This subtraction will be sent to you as a digital file. In fact, embroidery is only after release of the preliminary preview.

In general, we produce logo embroidery within 10 days of order clarity and order release.

Customized goods are excluded from exchange. Of course, we acknowledge qualitative complaints concerning the carrier product.

We are also happy to produce individual pieces. Please note, however, that there are fixed costs (stencil/setup costs) per order.